Type DIN
Standard		 ISOTHERMA®

Bulk density in dry state

Resistance to pressure

Heat transmission resistance

Thermal conductivity

 ASTMC 163

H 62 201

   360 kg/m3

   A1 –0.45 N/mm2

  1.20 W/m2 K

  0.078 W/mK

Thickness

Heat Transmission (W/m² K)

50 mm

60 mm

80 mm

100 mm

120 mm

1.58  W/m2 K

1.21 W/m2 K

0.90 W/m2 K

0.78 W/m2 K

0.66 W/m2 K

Material properties
Bulk density in dry state: 360 kg/m3

Quantity: 50 litres per bag

Weight: 18.5 kg

Resistance to pressure:
Standard ASTMC: 163
0.45 N/mm2

Heat transition:

Heat transition coefficient: 0.078
Acoustical improvement: 10 decibel

ISOTHERMA® was tested by the Laboratory of Thermodynamics of the University of Liège and the C.S.T.C.

 

logo02.jpg (22132 octets)

Trade data


Guarantee: We issue a 10-year guarantee for normal use. (Our terms of guarantee are available on demand).   The product is ready for use. Don’t mix ISOTHERMA® with any other products.

Sales units: EURO-Palet with 30 bags of 50 litres or Big-Bags of 1.000/2.000 litres.

Application

Pretreatment

The surface has to be thoroughly cleaned and evenly moistened.

Mixture

ISOTHERMA® is ready for use. You only have to add 17 to  18 litres of water per bag (50 litres). ISOTHERMA® can be mixed with concrete-mixers, hand-operated mixers, plaster machines (type G4) or floor plaster machines. Special manual skills are not required.

Working method

The application thickness can vary, but the minimum is 3 cm.

Drying

24 - 48 hours (depending on outdoor temperature and the relative humidity).
The maximum resistance to pressure of 45 tons/m2 will be achieved after 28 days.

Consumption

1 bag of 50 litres = 1 m2 (thickness of 4.5 cm)




All information on our homepage is indicative and therefore without obligation.

Back to menu