Isotherma: heat insulating lightweight concrete of high quality

Type

DIN
Standard

ISOTHERMA®

Bulk density in dry state

Resistance to pressure

Heat transmission resistance

Thermal conductivity

ASTMC 163

H 62 201

360 kg/m3

A1 –0.45&NBSP;N/mm2

1.20 W/m2 K

0.078 W/mK

Thickness

Heat Transmission (W/m² K)

50 mm

60 mm

80 mm

100 mm

120 mm

1.58 W/m2 K

1.21 W/m2 K

0.90 W/m2 K

0.78 W/m2 K

0.66 W/m2 K

Material properties

Bulk density in dry state: 360 kg/m3

Quantity: 50 litres per bag

Weight: 18.5 kg

Resistance to pressure:
Standard ASTMC: 163
0.45 N/mm2

Heat transition:

Heat transition coefficient: 0.078
Acoustical improvement: 10 decibel

ISOTHERMA® was tested by the Laboratory of Thermodynamics of the University of Liège and the C.S.T.C.

Technical data sheet
to download

Trade data

Guarantee: We issue a 10-year guarantee for normal use. (Our terms of guarantee are available on demand). The product is ready for use. Don’t mix ISOTHERMA® with any other products.

Sales units: EURO-Palet with 30 bags of 50 litres or Big-Bags of 1.000/2.000 litres.

Application

Pretreatment

The surface has to be thoroughly cleaned and evenly moistened.

Mixture

ISOTHERMA® is ready for use. You only have to add 17 to 18 litres of water per bag (50 litres). ISOTHERMA® can be mixed with concrete-mixers, hand-operated mixers, plaster machines (type G4) or floor plaster machines. Special manual skills are not required.

Working method

The application thickness can vary, but the minimum is 3 cm.

Drying

24 - 48 hours (depending on outdoor temperature and the relative humidity).
The maximum resistance to pressure of 45 tons/m2 will be achieved after 28 days.

Consumption

1 bag of 50 litres = 1 m2 (thickness of 4.5 cm)

Isotherma is a heat insulating lightweight concrete of high quality which can be used for renovation projects as well as in new buildings.

All information on our homepage is indicative and therefore without obligation.